Titan Quest Wiki

Installation Instructions for AllSkins 0.8

976pages on
this wiki

Installation Instructions for AllSkins 0.8 Mod for Titan Quest Immortal Throne Edit

Fairytale messagebox critical These are instructions to download and install the standalone version of the AllSkins mod. If you have the Fanpatch, you have a pre-release version of 0.8 inside it.

Please refer to the Fanpatch Notes, section "Additional Features of 1.17" to see how to use this pre-release version of 0.8 AllSkins embedded on the fanpatch.

You do not need to install the standalone version of AllSkins 0.8 to use the embedded version on the Fanpatch(or vice-versa), but you may use both concurrently, since they are compatible.

The AllSkins0.8 version works differently than the embedded version of the Fanpatch - please don't follow the instructions below or the How to use AllSkins 0.8 Guide if you wish to use only the Fanpatch embedded version.

Other mods use AllSkins like the Ctrl-Alt-MODs pack from (made by Ctrl-Alt-Suppr), or Lilith (made by Mostal). AllSkins works differently on those mods, so as with the Fanpatch, please read their respective Installation or Usage Guides about usage on embedded AllSkins in those mods.

Installation procedure: Edit

1) Download the mod Edit

AllSkins 0.8 can be found on the first post on the thread [Rel] AllSkins for TQIT on the forums

2) Check your download Edit

Current version is AllSkins 0.8c. Please adapt the instructions below if you have a later version.

The AllSkins0.8 for Titan Quest - Immortal Throne zip file (named should contain 26 files and 1 directory (called Skins) on it:


3) Preparing to Install Edit

Fairytale messagebox info I use as an example the following directories:

“C:\Program Files\THQ\Titan Quest Immortal Throne\” is the path where the Titan Quest Immortal Throne executable is installed (if you installed Titan Quest Immortal Throne via CD)

If you are a steam user, your path for the executable is most probably C:\Program Files\Steam\steamapps\common\titan quest immortal throne

“C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest - Immortal Throne\” is the path where the data of the Titan Quest Immortal Throne is installed.

  • Both directories listed above are important for the installation of the Allskins0.8 mod.
  • If you have installed the program in a place different as “Program Files”, and/or have a different path to “My documents”, please adapt the path accordingly.
  • Specially Windows Vista Users will have their “My Documents” path typically on: “C:\Users\<TestUser>\Documents\My Games\Titan Quest Immortal Throne\”
  • It's also very much probable that your user isn't called “TestUser”. You'll have to adapt the path to your PC's username as well.

4) If you have AllSkins 0.7 installed, read this, otherwise skip to 5) Edit

If you have AllSkins 0.7 installed, you will have created a sub-directory on your “C:\Program Files\THQ\Titan Quest Immortal Throne\” directory.

You will have the following structure:

“C:\Program Files\THQ\Titan Quest Immortal Throne\Database\Creatures\pc\female”, and

“C:\Program Files\THQ\Titan Quest Immortal Throne\Database\Creatures\pc\male” directories.

You should delete all files inside these directories. AllSkins 0.8 works in a different way, and will not need the files on these directories anymore. Furthermore,

those files disturb the work of AllSkins 0.8 and as such have to be removed. Note: you don't need to delete the directories themselves, only the files inside them.

If you have placed your own files on those directories (for example, the femalepc01_Nyours_Placeholder*.tex files), you may keep those there, since those files are

meant to override the standard ones of the mod itself, but those are the only ones that can be left. Please delete all other ones.

You're now ready to install AllSkins 0.8.

Fairytale messagebox info Even after deleting those files, you'll be able to see your characters as they were before, and you'll be able to use AllSkins 0.7 still. The new version

was designed to keep the compatibility with the older version.

If you don't want/need AllSkins 0.7 anymore, you can delete the folder where the mod is installed now (not necessary though). This would mean deleting this directory:

C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest - Immortal Throne\CustomMaps\AllSkins0-7

5) Create a temporary directory Edit

You can create this temporary directory anywhere, e.g.: C:\tmp. Copy the zipped mod file you downloaded from the internet to the temporary directory.

Unpack the zip directory on this directory. Right-Click on the zip file and unzip it. Be sure to choose the option "Extract here" and not the option "Extract to AllSkPackIT0-8c directory".

After unpacking the zip file, you should have 1 directory and 23 files under your new AllSkPackIT0-8c directory, like it was referred on point 2)

If after unpacking you have two directories named "AllSkPackIT0-8c" (one inside the other) instead of only one of those directories, use the inside directory.

Copy now the directory named AllSkPackIT0-8c from this temporary directory that you created to the CustomMaps directory (like shown on point 6 below).

6) Check your directory structure Edit

If AllSkins 0.8 was the very first mod for Titan Quest: Immortal Throne that you ever downloaded, you have to create a directory first, like shown below.

(If this directory exists already, you (obviously) don't have to create it).

When the Titan Quest: Immortal Throne game was installed, this directory will surely have the been created:

C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest - Immortal Throne


You may have to create (if it doesn't exist yet) a sub-directory of the directory above called "CustomMaps". After creating the directory, the structure will be:

C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest - Immortal Throne\CustomMaps\


7) Copy the files Edit

After creating (or checking for the existence) of the "CustomMaps" directory on point 6), move the directory AllSkPackIT0-8c

that you unzipped on your temporary folder from point 5) to the directory that you created or checked for existence on point 6), i.e.:

C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest Immortal Throne\CustomMaps\

After your installation efforts you should have a structure like this:


You're almost done with the installation.

Get now the all files inside the Skins subdirectory (5 files total, including "Creatures.arc" file, "AllSkinsBMPs.arc" and 3 batch files) and copy them to the directory below:

“C:\Program Files\THQ\Titan Quest Immortal Throne\Resources”

Fairytale messagebox critical Please DON'T copy those files to the “C:\Program Files\THQ\Titan Quest\Resources” directory. You have to copy them to the Titan Quest Immortal Throne directory,

not to the Titan Quest directory. Copying it to the Titan Quest directory may create problems in your Titan Quest installation.

Fairytale messagebox info If you are a (up to 1.17a) fanpatch user who is installing the standalone version of AllSkins 0.8, you will notice that there's already a creatures.arc file on the directory

“C:\Program Files\THQ\Titan Quest Immortal Throne\Resources”. It's ok to copy over this file because it's the fanpatch's embedded AllSkins Creatures.arc file. For safety reasons, you may

want to backup the file before copying the AllSkins Creatures.arc over it, though

Note: in case you can't copy any file to “C:\Program Files\THQ\Titan Quest Immortal Throne\Resources”, you can still use the mods by copying the "Creatures.arc" file to C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest Immortal Throne\CustomMaps\<AllSkinsModName>\Resources, where <AllSkinsModName> is the name of one of the 3 mods that are created by the installation procedure. The disadvantage of doing that is that you'll always need to have AllSkins mod active to use your skin, and you have to copy "Creatures.arc" to the 3 mods (Skirt,Skirtless and Dress) if you want to use all 3.

8) Run the batch files Edit

On the figure on point 7), you see that there are 3 batch files for installing the mod: English-Setup.bat, Deutsch-Setup.bat and Francais-Setup.bat. Use the one that corresponds to the language you want to have installed for AllSkins Mod. The batch file will run for a small amount of time and create 3 mods - the 3 mods of AllSkins 0.8 - in your language.

You can now delete the AllSkPackIT0-8c directory which is on C:\Documents and Settings\<TestUser>\My Documents\My Games\Titan Quest Immortal Throne\CustomMaps\

You should be done with the installation of the mod now. Please proceed to the How to use AllSkins 0.8 Guide.

Around Wikia's network

Random Wiki